Casters Inc, Pensacola, FloridaFollow Us on Facebook! - Casters Inc, Pensacola, Florida
Industrial Casters Specialist
Phone: 850.434.8338
castersfl@hotmail.com
M-F 730am-400pm  MAP




Casters Inc
Casters Inc
Caster Assembly -  Mounting Plate, Main Load Bearing, Retainer, Main Load Bearing, Lower Retainer, Kingpin, Horn (side member), Spanner Bushing, Nut, Wheel, Roller Bearing Sleeve, Axel-Bolt and Nut (With grease fitting), Bearing End Washer, Roller Bearing
 

Mobility is the Answer

Caster Selection Think of a caster as a tool, a mobility tool. Using the correct casters and wheels is just as important to production as most any piece of equipment in your business. Office chairs that don't roll properly can slow office production. Hand trucks, dollies, and carts with worn out wheels or the wrong caster can slow deliveries and warehouse factory production. The correct wheel is important. The size of wheel is critical to the mobility. Quality bearings in wheels are necessary to extend the life of a wheel, and most inexpensive wheels either do not have a bearing or have a plastic bearing.

Casters from big box stores and some internet casters are usually not industrial class casters, even though they look the same. We specialize in industrial casters only. Industrial casters are manufactured with heat treated ball bearings and raceways. This is critical for a caster to swivel under heavy loads.

Caster selection

Caster Selection Load carrying capacity of a caster varies by caster and wheel used. On a cart or work bench that weights 500lb plus a load of 500lbs total weight is 1000lbs, caster used in this application should carry at least 250lbs each. The mobility of the piece is determined by the size of the wheel and proper bearings in the wheel and hardened raceways/ball bearings in the swivel caster fork.

Wheel selection

Caster SelectionDifferent types of wheels are available. Wheels will roll smoothly if used in the correct application. Some wheels are manufactured for floor protection, ease of movement, and quiet rolling. Hard wheels are the easiest to roll, and designed for heavy loads. Non-marking wheels leave floors clean. Soft wheels are quite, however they will flatten in the wrong application when loads are to heavy, and the wheel tread will peel apart on rough surfaces. Help keep your business production up by purchasing the correct caster with the right wheel for the job. We hope the above information is helpful. Please call, email or fax. We are here to help you select the right caster mobility tool and save you money, time, and effort.

Thanks for visiting our web site.

Casters Inc
Casters Inc
Gate Casters Jackson, MS       Gate Casters Gulfport, MS       Gate Casters Hattiesburg, MS       Gate Casters Biloxi, MS       Gate Casters Southaven, MS
Gate Casters Meridian, MS       Gate Casters Tupelo, MS       Gate Casters Greenville, MS       Gate Casters Olive Branch, MS
Gate Casters Destin, Florida       Gate Casters Panama City, Florida       Gate Casters Port St. Joe, Florida       Gate Casters Apalachicola, Florida       Gate Casters Tallahasse, Florida
Gate Casters Marianna, Florida       Gate Casters Bonifay, Florida       Gate Casters Chipley, Florida       Gate Casters Defuniak Springs, Florida
Gate Casters Quincy, Florida       Gate Casters St Mark, Florida
Gate Casters Mobile, Alabama       Gate Casters Gulf Shores, Alabama       Gate Casters Orange Beach, Alabama       Gate Casters Fairhope, Alabama       Gate Casters Daphne, Alabama
Gate Casters Spanish Fort, Alabama       Gate Casters Evergreen, Alabama       Gate Casters Enterprise, Alabama       Gate Casters Montgomery, Alabama
Gate Casters Dothan, Alabama       Gate Casters Tuscaloosa, Alabama       Gate Casters Huntsville, Alabama       Gate Casters Birmingham, Alabama

MenuBar Spacer

Copyright© 2024 CastersFL.com, All Rights Reserved     
Site by: Gulfwebs.com